Revision 1 of "free play" ROMs for Clown.

Patches installed to disable the coin meter check, allowing Setting 30
to be used to select Coin or Free Play. If Setting 30 is 0, then the
game works normally on Coin play. If setting 30 is 1, then the game
works on Free Play and will allow a game to be started even if Credits
is 0.

Note: Clown originally shipped using a 2532 EPROM in IC1, and a 2764
EPROM IC2. This ROM set uses 2 x 2764 ROMs in IC1 and IC2. This will
require changing the board jumpers to:

  J1 - A  J2 - B  J3 - C  J4 - F
  J5 - H  J6 - Y  J7 - K  J8 - L
  J9, J10, J11, J12 (removed)
  J13 (installed)

and (depending on the board in your game) may require replacing the
sockets for IC1 and IC2.


Checksum for CLOWN.IC1: 0x5910
Checksum for CLOWN.IC2: 0xE508
Serial Number: ZP01

David Gersic
http://www.zaccaria-pinball.com
14 March 2011
